9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-913001.png)
Tire Pressure Sensor: Service and Repair
Tyre Pressure Sensor Removal
Pressure sensor, tyre pressure
To remove
1. Remove the wheel.
2. Remove the tyre.
3. Remove the sensor
To fit
1. Fit the sensor and rubber seal in the hole in the wheel.
Hold the sensor when the nut is fitted.
Tightening torque 10 Nm (7.5 ft. lbs.)
2. Fit the tyre.
3. Fit the wheel.
