9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
ACC
CU
EHU
Supplement D3
Replacing the Communication Unit (CU)
Important
Handle the fibre optic cables with care or the signal may be distorted.
^
It is very important that the two leads in the connector are not confused with one another.
^
Do not splice the cables.
^
Do not bend the cable in a radius smaller than 25 mm.
^
Do not expose the cable to temperatures exceeding 85 °C.
^
Keep the cable ends free from dirt and grime.
^
Do not expose the cable to impact as this may cause the transparent plastic to whiten, thereby reducing the intensity of the light and causing
possible communication interruptions.
^
The cable should not lie against any sharp edges as this may cause increased signal reduction.
Warning