9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
Door Module: All Technical Service Bulletins
Body - Window Can't Be Closed/Pinch Protection Triggered
Bulletin Number: 831-2595
Date: December 2005
Market: all
Pinch protection triggered
Cars affected
Saab 9-3 M03- equipped with pinch protection:
Background
It appears that fully functional door control modules (702) have been replaced to rectify the pinch protection triggering when the door window is closed.
The following fault diagnosis/procedure should be followed to prevent fully functional door control modules being replaced.
Symptom description
Pinch protection is triggered and the door window cannot be closed
Parts required
Dependent on the type of procedure being carried out. See EPC for part number.
Procedure
Note
In order to prevent the pinch protection from triggering on new cars, the pinch protection must be calibrated during the predelivery service, see
WIS - Service - Predelivery service
1.
Check the glass guide seal on both sides of the window. Check the following:
1.A. that the guide in the seal is clean. Check that no rubbish has become caught. Clean the seal if necessary.