9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-2873002.png)
9. Remove the front legroom adjuster screws on the centre console's aluminium frame.
10. Dismantle the screws that hold the Airbag Control Module.
11. Drive in a wedge between the floor and the aluminium frame so that the aluminium frame is lifted about 2 cm.
IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight
apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection.
12. Dismantle the Airbag Control Module's two connectors.
13. Lift up and carefully move the Airbag Control Module out between the aluminium frame and the floor.
To fit
WARNING: Do not connect the control module before it is fitted.
1. Fit the Airbag Control Module by inserting it between the centre console's aluminium frame and the floor into its position. Tighten the screws that
