9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-2409008.png)
7. Strip 4 mm of the lead's insulation.
8. Search for the connector in the spare parts catalogue/EPC to find the part number of the sleeve to be used.
9. Fit the sleeve on the lead using olive green pliers (0.35-0.75 mm) from 86 12 939 Toolbox, wiring harness.
10. Check that the stripped lead goes through the entire clamped portion of the sleeve and that the insulation is properly clamped.
11. Press the sleeve into the connector.
12. Check that the sleeve is properly secured.
13. Check that the sleeve's depth of engagement is the same as the other sleeves in the connector.
14. Fit the secondary catch.
15. Secure the leads with a cable tie.
To Fit
