9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-2311001.png)
Starter Cable: All Technical Service Bulletins
Starting System - Starter Motor Inoperative
TECHNICAL SERVICE BULLETIN
Bulletin Nbr: 331-2628
Date:...........Oktober 2006
Market: all
Starter motor does not work
Cars affected
9-3 M03-04 with engine alternative B207
Background
The positive cable connection to the starter motor and the generator is not waterproof. This may result in water entering and rusting away the connection.
In the case of customer complaint, the following procedure must be carried out.
Symptom description
Starter motor does not work.
Parts required
55 563 382 Positive cable 25 mm, cold climate market
55 563 072 Positive cable 16 mm, hot climate market
92 150 191 Cable tie (x 13)
Heat resistant fabric tape
Procedure
1. Position the car on a lift.
2. Remove the upper engine cover (A).
3. Remove the battery cover, lower section in accordance with WIS - Electrical System - Charging systems - Adjustment/Replacement
4. Remove the positive cable connection (A) from the positive terminal for the battery.
