9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
-
Fit the positive cable connection to the battery's positive terminal (A).
-
Insert the positive connections into the electrical centre through the seal (B).
-
Route the extension wiring along the engine's wiring and allow the extension wiring to hang down.
13. Fit the positive connections (A) and the fuses (B) in the electrical centre:
NOTE:
There may be a cable/fuse missing depending on the car's specification.
-
Connect the red cable to fuse 1.
-
Connect the brown/white cable to fuse 2.
NOTE:
Which brown/white cable is connected to fuse 2 and 3 is not important, as both have the same positive supply.
-
Connect the brown/white cable to fuse 3.
-
Connect the red cable to fuse 4.
-
Fit fuse 1-4.