9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-1937001.png)
Transmission Mode Switch: Service and Repair
Gear selector control module (726)
To remove
Before removal, see Before changing a control module.
1. Remove the right side cover on the centre console (1 screw).
2. Remove the front stay.
3. Remove the front part of the air duct.
Important: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to
avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection.
