9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-1942004.png)
that the line is visible in the middle of the adjustment tool groove. Tighten the bolts.
Tightening torque 25 Nm (18 ft. lbs.)
4. Remove the adjustment tool.
5. Fit the gear selector lever.
Tightening torque 20 Nm (15 ft. lbs.)
6. Fit the oil cooler with new O-rings.
Tightening torque 24 Nm (18 ft. lbs.)
7. Clean away any spilled oil on the engine and transmission.
8. Plug in the connectors under the control module. Plug in the control module connector and fit the battery tray.
