9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-1947004.png)
3.
Aut: Remove the gear cable clip from the pipe.
4.
Remove the pipe from the brake servo.
5. Remove the upper nuts to the heat shield on the bulkhead partition and fold aside the heat shield.
6.
Remove the vacuum pipe. Any heat shield on the check valve shall not be refitted.
To fit
1.
Align the pipe in position and fit it to the brake servo.
