9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
5. Pull of the knob by screwing in a self-threading plate screw with flat tip (25 x 5.5 mm) into the hole.
To fit
1. Apply adhesive to the knob as illustrated. Use 74 96 292 Thread locking adhesive.
5. Pull of the knob by screwing in a self-threading plate screw with flat tip (25 x 5.5 mm) into the hole.
To fit
1. Apply adhesive to the knob as illustrated. Use 74 96 292 Thread locking adhesive.