9-3 (9440) L4-2.0L Turbo (2.0 T) (2006)
^
Lift up the foam blocks and fit the clips (B).
^
Remove the rear bonnet seal (A).
25.
Fit the wiper arms:
^
Fit the wiper arms (B).
^
Fit the protective covers (A).
26.
Fit the battery's negative cable (B) and the battery cover (A).
27.
Carry out "Procedures after disconnecting the battery" in accordance with WIS - Electrical System - Wiring harness and components - Wiring
harness.
28.
Clear any diagnostic trouble codes.