9-3 (9440) L4-2.0L Turbo (2.0 T) (2006)
/l4-2.0l_turbo_(2.0_t)/Page-1181001.png)
Balance Shaft: Service and Repair
Balancer Shafts
Balancer shafts
To remove
1. Remove the Power train. Fit 83 94 751 Engine holder and lift up the cylinder block in 78 74 878 Floor stand.
2. Remove the cover (A) over the ignition coils.
3. Detach the ignition coil connector (B).
