9-3 (9440) L4-2.0L Turbo (2.0 T) (2006)
/l4-2.0l_turbo_(2.0_t)/Page-1186013.png)
21. Fit 83 94 850 Lifting beam and 83 95 287 Holder. Relieve the engine and remove the engine bracket.
22. Lower the engine about 3 cm using the lifting beam.
23. Raise the car and remove the crankshaft pulley with 83 95 360 Holding tool, crankshaft pulley (shaft only) and 83 96 210 Holding tool, crankshaft
pulley, B207.
