9-3 (9440) L4-2.0L Turbo (2.0 T) (2006)
/l4-2.0l_turbo_(2.0_t)/Page-1217007.png)
2. Clean the connections on the thermostat housing, fit a new seal and fit the water pipe.
3. Fit the stud to the coolant pump driver using 83 96 103 Holding tool for changing water pump, B207 from the tool kit.
4. Fit the coolant pump with new seal, sparingly lubricated with Vaseline, non-acidic, by guiding in the stud through one of the holes in the balancer
shaft sprocket.
5. Insert the coolant pump bolts, the two rear bolts and the lower bolt through the timing cover.
6. Lower the car.
7. Insert and tighten the upper bolt through the timing cover.
