9-3 (9440) L4-2.0L Turbo (2.0 T) (2006)
/l4-2.0l_turbo_(2.0_t)/Page-1314001.png)
Body Control Module: Service and Repair
Body Control Module (BCM) (707)
To remove
1. Carry out procedures before removing a control module.
2. Remove the lower section of the dashboard
IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight
apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection.
3. Unplug the control module connector.
4. Remove the control module by pressing in the 4 snap fasteners.
To fit
1. Fit the control module.
