9-3 (9440) L4-2.0L Turbo (2.0 T) (2006)
1. Fit the door module pressing it obliquely upward so that the clip engages.
2. When changing the driver door module: Fit the door trim screw.
3. When changing the driver door module: Affix the cell block with double-sided tape. The use of 16-30 20 807 is recommended.
4. Make sure the door trim clips are in place and intact. Replace the clips if necessary.
5. Fit the door trim.
6. Cars with pinch protection: Perform Programming of the pinch protection.
7. If the control module has been changed, perform Measures after changing the control module