9-3 (9440) L4-2.0L Turbo (2.0 T) (2006)
/l4-2.0l_turbo_(2.0_t)/Page-2446003.png)
Cables used in the front harness and engine harness have a higher temperature resistance. When replacing the cables in these harnesses, cables with the
new type of insulation must be used.
Optic fibre cable
The optical fibre cable has colour markings so that the correct fibre is used when adding equipment. The fibre cable must not be bent too hard.
WARNING: The red visible light is of laser class 1. Do not look directly into the optic fibre or the control module connector at close range. At a
distance of less than 20 mm from your eyes to the light source, your eyes could be damaged.
Symbols Used In the Wiring Diagrams
Symbols Used In The Wiring Diagrams
Date marking of diagrams
All diagrams are marked at the bottom. For example,
F5E08
050512
where the top row is the file name and the bottom one is the date on which the diagram was compiled. The date is given in the form YYMMDD. Always
use the latest wiring diagram.
General
The wiring diagrams are compiled with the following conditions:
^
Switches and relays are represented in their inactivated and unenergized state unless otherwise indicated.
^
No key in the ignition switch
^
Central locking system unlocked
^
Coolant, brake and washer fluid topped up
^
Gear lever/selector lever in neutral position
^
Handbrake released
Fuses
