9-3 (9440) L4-2.0L Turbo (2.0 T) (2006)
C = Center
D = Driver side
F = Front
H = Hatch (boot lid/tailgate)
P = Passenger side
R = Rear
LH = Left Hand
RH = Right Hand
Connectors
The connectors located between the various wiring harnesses start with H, e.g. H16-1, where the number after the H indicates the number of poles the
connector has. The number after the hyphen is a serial number within that pole quantity group. In the example H16-1, the connector has 16 poles and it is
the first in the group.
There are illustrations of all connector housings in the section "Electrical System -Wiring harness and components - Connector - Component location"
Sensors and monitors
The symbols for sensors and monitors have been simplified. The connector/output side of the sensors have an internal symbol showing the type of output
signal and the other half is a symbol showing the measured quantity.