9-3 (9440) L4-2.0L Turbo (2.0 T) (2006)
/l4-2.0l_turbo_(2.0_t)/Page-2652002.png)
Once the control module has been separated from the car, turned the ignition key to the OFF position. The control module can then be removed. Carry
out the "Remove" action with Tech2 even if the control module cannot be contacted or is completely missing because data in other control modules
must be changed.
The action involves the following:
Security codes will be reset, bus lists updated, data in other control modules updated and data that may have to be written into a new control module
read and displayed.
