9-3 (9440) L4-2.0L Turbo (2.0 T) (2006)
/l4-2.0l_turbo_(2.0_t)/Page-2009008.png)
18. Remove the cover using a screwdriver.
To fit
1. Clean inside the valve housing cover. Remove gasket remains from the mating surfaces between the cover and the gearcase. Clean the sealing
services with Cleaning agent, Loctite Super Clean 7063.
2. Apply an approx. 2 mm thick bead of 90 543 772 Silicone flange sealant on the cover and fit the cover on the gearcase. Add 74 96 284 Thread
locking adhesive to the bolts and tighten them alternately.
Tightening torque 25 Nm (18 ft. lbs.)
