9-3 (9440) L4-2.0L Turbo (2.0 T) (2006)
12. Hook on the ends of the wire to the screwdriver and bend the ends to stop them slipping.
13. Pull the screwdriver back through the glued joint into the cabin. Pull in the wires about 0.7 m.
14. Unhook the cutting wires from the screwdriver. Straighten the ends of the wire to an obtuse angle. Remove the screwdriver from the car.
15. Place the wire under the strip. Poke it in with the plastic tool supplied with the kit. Make sure the wire reaches all the corners. Pull the wire taut
and check its position.