9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-3465002.png)
5. Remove the OnStar control module with bracket.
6. Remove the bracket from the OnStar control module.
To fit
1. Fit the bracket to the OnStar control module.
2. Put the OnStar control module in its installation position.
IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further
information regarding connectors, refer to Connectors, handling and inspection.
