saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Solenoid, Fuel Filler Flap, CV (434a)|Page 16158 > < Fuel Door Release Actuator|Specifications|Page 16155
Page 1
background image

Fuel Door Release Actuator: Service and Repair
Solenoid, Fuel Filler Flap, CV (434a)

Solenoid, Fuel Filler Flap, CV (434a)

To remove

1. Open the boot lid.
2. Remove Luggage compartment side trim, CV on the right hand side.
3. Loosen the solenoid retaining bolts and lift up the solenoid. Pull the rubber gaiter from the filler flap sleeve.

4. Part the connector.

To fit

Fit a new gaiter as follows:

1. Insert the gaiter through the filler flap sleeve hole using a pair of pliers.

Solenoid, Fuel Filler Flap, CV (434a)|Page 16158 > < Fuel Door Release Actuator|Specifications|Page 16155