9-3 (9440) V6-2.8L Turbo (2008)
Fuel Door Release Actuator: Service and Repair
Solenoid, Fuel Filler Flap, 5D (434a)
Solenoid, Fuel Filler Flap, 5D (434 A)
To remove
1. Open the boot lid.
2. Remove C-pillar trim, 5D.
3. Remove Rear side trim, 5D.
4. Fold away the insulation mat.
5. Undo the solenoid retaining bolts and lift up the solenoid. Pull off the rubber bellows from the tank filler neck.
6. Unplug the connector.
Fitting the solenoid with an old bellows
1. Pull out the solenoid bellows slightly.