saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Changing the Headlining, 4D|Page 16572 > < Changing the Headlining, 4D|Page 16570
Page 13
background image

14. Where appropriate.

Fit the left-hand speaker into the parcel shelf.

15. Position the wiring harness to the REC and secure the clips.
16. Fit the C-pillar trim.
17. Fit the B-pillar trim.
18. At the A-pillar, plug in the connector to the interior light and fix it in place with the mounting clips. Fit the A-post trim.
19. Fit the parcel shelf trim.
20. Fit the sun visor.

Changing the Headlining, 4D, US/CA

Changing The Headlining, 4D, US/CA

To remove

WARNING:  Take care not to damage or loosen the energy absorbers. Damaged or loose energy absorbers must not be refitted. If the occasion
should arise, the entire headlining must be changed. Damaged energy absorbers may impair head protection in case of a collision.

NOTE:  Pay attention to cleanliness so that the headlining does not become dirty.

1. Remove the sun visor.
2. Remove the parcel shelf trim.

Changing the Headlining, 4D|Page 16572 > < Changing the Headlining, 4D|Page 16570