9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-3836002.png)
Mixture:
70% Terotex 3000 (white or black)
20% 2K paint
To maintain durability, 2K paint must always be used, even for black or white products.
10% Standard curing agent (suitable for paint), but not MS type.
5. Allow to dry and sand if required.
6. Shower carefully with the mixture. If a coarser structure is desired, lower the spray pressure and hold the spray gun at a greater distance. If a finer
structure is desired, increase the spray pressure and hold the gun closer.
7. Place the part in a paint oven at 60 degrees C, so that the structure sets.
Useful tips; The mixture can also be used to raise small plastic burrs on sanded surfaces. The part can be cured in an oven at 60 degrees C and then
rubbed with an abrasive cloth, Scotchbrite or the like.
