9-3 (9440) V6-2.8L Turbo (2008)
5. Fit the clips and tap in the centre pins. Check the fit of the sill cover.
Sill Cover, CV
Sill Cover, CV
Removing
1. Remove the screws at the wheel housings.
2. Loosen the rubber sill cover moulding. Do not remove the rubber moulding from the front or rear wing.
IMPORTANT: Do not pull loose the rubber strip from the front wing as the wing liner will have to be removed before the rubber strip
can be refitted.
3. Remove the sill cover bolts behind the rubber moulding.