9-3 (9440) V6-2.8L Turbo (2008)
2. Move up the top part of the B-pillar trim so it rests against the locks in the headlining.
3. Aim the height adjustment in the trim to the height adjustment on the B-pillar.
4. Press home the middle clips on the trim against the B-pillar. Take care to make sure the clips are located correctly in the grooves.
5. Press home the B-pillar trim at the bottom in the clips on the B-pillar. Take care to make sure the rubber strip along the doorframe does not get
pinched.
6. Fit the seatbelt mounting and cover to the seat.
Tightening torque: 30 Nm (22 ft. lbs.)
Cars with PPS: Plug in the belt force sensor connector. Fit the cover.