9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-4053002.png)
6. Place some paper under the hydraulic unit to catch any hydraulic fluid that may run out.
7. Wipe clean around the unit with some paper.
8. Remove the bolts securing the valve to be changed.
NOTE: If the "green" valve is being changed: Undo the bolts on the "orange" valve and turn it slightly to access the bolt for the "green" valve.
9. Withdraw the valve from the hydraulic unit.
To fit
1. Place the valve in position for fitting.
