9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-4067011.png)
28. Position a cloth under the hydraulic unit to catch any hydraulic oil that may run out.
29. Remove the attaching plate together with the hydraulic lines from the hydraulic unit.
IMPORTANT: If several hydraulic lines are being replaced, they must be marked together with their connections to the hydraulic unit
and hydraulic cylinders. They must not be mixed up. The hydraulic lines are marked with the same number at both ends and are
different lengths. In addition, the entries through the attaching plate are marked to avoid confusion.
