9-3 (9440) V6-2.8L Turbo (2008)
^
Press 82 93 854 Fitting tool, hydraulic line over the hydraulic line connection.
^
Place the circlip on the taper of the special tool. Press it over the flange on the line.
13. Fit new O-rings on the new hydraulic lines:
^
Press 82 93 854 Fitting tool, hydraulic line over the hydraulic line connection.
^
Fit the O-ring on the special tool's cone and fit the O-ring on the hydraulic line.
14. Remove the special tool.
15. Place the attaching plate together with the hydraulic lines in mounting position.