9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-4071005.png)
3. Lower the cable into the luggage compartment. The cable must be behind the trim.
4. Fit the upper cable clip on the torsion box. Note the position of the cable.
5. Remove the soft top support. Close the soft top cover and sixth bow.
6. Open the bootlid.
IMPORTANT: Take care when opening the boot lid when the soft top cover is not locked as there is a risk of damaging the paintwork.
7. Put the cable in mounting position. The cable must be lying behind the hose package. Make sure the cable is drawn correctly.
8. Fit the cable clip.
