9-3 (9440) V6-2.8L Turbo (2008)
Seat Heater: Service and Repair
Heating Pad, Front Seat Cushion
Heating Pad, Front Seat Cushion
To remove
1. Remove the seat.
2. Remove front seat cushion.
3. Remove the seat cushion upholstery.
To fit
WARNING: Cars with PPS: There must be no more than two attached heating pads. If there are already two, the foam cushion with
corresponding PPS components must be replaced. Otherwise there is a risk that the PPS/airbag system will not operate properly, which could
lead to sever personal injury.
1. Cars with PPS: Check the number of heating pads.
Tape the new heating pad on top of the old one. Use double-sided adhesive tape. Plug in the heating pad connector.