9-3 (9440) V6-2.8L Turbo (2008)
Front Door Weatherstrip: Service and Repair
Weatherstrip, Front Door
Weatherstrip, Front Door
To remove
1. Remove the A-pillar trim.
2. Remove the B-pillar trim.
3. Remove the lower panel from the A-pillar
4. Remove the front door weatherstrip by carefully pulling it straight off the metal flange.
To fit
1. Fit the front door weatherstrip. Use a rubber hammer so that the weatherstrip is properly located.
NOTE: If replacing the weatherstrip, the installation strap must be removed once all components have been installed.