9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-2432002.png)
Top up with fluid in the brake fluid reservoir.
5. Tighten the nipple, fit the rubber plug, move the brake bleeder to the air nipple on the rear left brake caliper and open the nipple. Drain about 50
ml brake fluid.
Top up with fluid in the brake fluid reservoir.
6. Tighten the nipple, fit the rubber plug and lower the car to the floor.
7. Check the operation of the brakes. Depress the brake pedal and check that it does not feel spongy or go all the way down to the floor.
8. Check the brake fluid level and adjust as necessary.
