9-3 (9440) V6-2.8L Turbo (2008)
Brake Caliper: Service and Repair
Brake Caliper, Rear
Brake caliper, rear, 4WD
To remove
1. Lift the rear of the car in order to remove the rear wheel at a later time.
2. Remove fuse 6 from instrument panel electrical center 22.
3. Depress the brake pedal slightly using a brake pedal clamp.
4. Loosen the handbrake adjustment so that the cables can be unhooked from the brake caliper. See
Adjusting the handbrake cable.
5. Raise the car.
6. Remove the wheel.
7. Remove the bolts for the bushings (A) and fold down the anti-roll bar (B).
8. Remove the brake hose from the hydraulic body (A).