saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Master Cylinder|Page 10181 > < Master Cylinder|Page 10179
Page 2
background image

7. Open the nipple and draw out brake fluid until one of the reservoir chambers is empty.
8. Disconnect the brake bleeder and close the nipple.
9. Connect the brake bleeder to the air nipple on the front right wheel.

10. Open the nipple and draw out brake fluid until the other reservoir chamber is empty.
11. Disconnect the brake bleeder and close the nipple. Lower the car.
12. Manual gearbox: Connect the brake bleeder to the clutch bleed nipple.
13. Manual gearbox: Open the nipple and suction out brake fluid until the level in the reservoir falls below the connection.
14. Manual gearbox: Disconnect the brake bleeder and close the nipple.
15. Manual gearbox: Remove the clutch hose from the brake fluid reservoir. Place some rags underneath to collect any brake fluid that may run out.

Master Cylinder|Page 10181 > < Master Cylinder|Page 10179