9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-2467004.png)
2. Fit the brake fluid reservoir to the master cylinder.
3. Fit the brake pipes to the master cylinder and TCS/ESP unit.
Tightening torque: 16 Nm (12 ft. lbs.)
4. Manual gearbox: Connect the hose from the main clutch cylinder to the reservoir.
5. Plug in the connector to the level sensor.
Fill with brake fluid and bleed the brakes and clutch.
6. Fit the heat shield over the brake servo.
