9-3 (9440) V6-2.8L Turbo (2008)
15. Refit the cover on the left-hand side of the instrument panel.
Marking the modification identity plate (not US/CA)
After carrying out the procedure, box A2 on the modification identity plate must be marked.
From and including M04 the car's Warranty and Service Book contains the "Table of Modifications". Mark the box with the number "7" if the procedure
was carried out by the importer or with the number "8" if carried out by the dealer.
Fitting the modification identity plate (not US/CA)
NOTE: A modification identity plate must only be fitted where local directives require the marking of the car.
Fit the modification identity plate in accordance with WIS 9-3 (9440) - M08 - General - General - Technical data - Plates and labels.