9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-2482002.png)
8. Remove the brake servo bolts. Keep track of the O-rings that sit between the brake servo and the body.
9. Remove the brake servo from the bulkhead.
To fit
1. Change the brake servo gasket.
2. Apply 74 96 268 Thread locking adhesive to the brake servo bolts. Position the brake servo and check that the pushrod fork is correctly positioned
at the brake pedal. Fit the brake servo bolts with O-rings between the brake servo and body.
Tightening torque: 20 Nm
