Camshafts In Situ, Front Cylinder Head for V6-28L Turbo Engine
/v6-2.8l_turbo/Page-1116006.png)
17. Lift out the camshafts and note the rear marking on the camshafts (B). The last letters in the marking:
RI = intake camshaft, rear cylinder bank
RE = exhaust camshaft, rear cylinder bank
To fit
1. Position the camshafts and use EN 48383-3 to check that the camshafts are mounted at the correct angle (B).
Last letters in the marking:
RI intake camshaft, rear cylinder bank
RE exhaust camshaft, rear cylinder bank
