9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-1116008.png)
5. Remove EN-48313 Fixing tool.
6. Tighten the bolts of both camshaft sprockets (B), counter holding with an open spanner on the camshaft flats.
Tightening torque: 65 Nm (48 lbf ft)
7. Fit the camshaft position sensor (555R) using a new gasket. (B)
Tightening torque 10 Nm (7 lbf ft)
