9-3 (9440) V6-2.8L Turbo (2008)
3. Fit the bolt using 83 95 360 Holding tool, crankshaft pulley (handle only) and EN47981 Holding tool, pulley.
Tightening torque: 100 Nm + 150 degrees (74 lbf ft + 150 degrees)
3. Fit the bolt using 83 95 360 Holding tool, crankshaft pulley (handle only) and EN47981 Holding tool, pulley.
Tightening torque: 100 Nm + 150 degrees (74 lbf ft + 150 degrees)