9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-1138035.png)
28. Attach the wiring harness (D) to the camshaft cover using new cable ties.
29. Plug in the coolant temperature sensor connector (C) and press down the heat shield.
30. Install the ignition coils for cylinders 2-4-6. Plug in the connectors (A).
Tightening torque 10 Nm (8 ft. lbs.)
31. Fit the left-hand grounding point (B).
32. Fit the power steering fluid reservoir's bolt (C).
Tightening torque 10 Nm (8 ft. lbs.)
