9-3 (9440) V6-2.8L Turbo (2008)
Valve Cover: Service and Repair
Camshaft Covers, Removed Engine
Camshaft covers, removed engine
To remove
1. Remove the power train from the car; see Power train, to remove and Power train, to remove, 4WD.
2. Remove other equipment from the engine; see Replacing the engine (power train on the subframe) and Replacing the engine (power train on the
subframe), 4WD
3. Fit 32 025 048 Holder on the engine and place the engine on an engine stand.
4. Unplug the bypass valve connector (A).
5. Detach the vacuum hoses and the crankcase ventilation pipe from the turbocharger (B).
6. Remove the front lifting eye (A).