saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

ABOUT US
Valve Cone, Rear Cylinder Head, B284 (New Version)|Page 4472 > < Valve Cone, Rear Cylinder Head, B284 (New Version)|Page 4470

9-3 (9440) V6-2.8L Turbo (2008)

Page 9
background image

21. Press down the valve plate with EN-46110 Valve spring tool (B).

Important
The compressed air must not be disconnected when the valve cone is removed. Do not press on the valve stem either as counter pressure
in the cylinder could reduce and the valve could fall down into the cylinder.

22. Remove the valve cone with a magnet (A).

Valve Cone, Rear Cylinder Head, B284 (New Version)|Page 4472 > < Valve Cone, Rear Cylinder Head, B284 (New Version)|Page 4470