9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-1142015.png)
10. Remove EN-48313 Fixing tool.
11. Tighten the bolts of both camshaft sprockets (B), counter holding with an open spanner on the camshaft flats.
Tightening torque: 65 Nm (48 ft. lbs.)
12. Fit the camshaft position sensor (555F) using a new gasket (C).
Tightening torque: 10 Nm (7 ft. lbs.)
