9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-1175007.png)
20. Tighten EN-48313 Fixing tool manually so that the chain is unloaded. Counterhold using an open spanner so that the tool does not turn.
Important
It is vital that EN-48313 is properly fitted. If tension is not relieved from the chain when the camshaft sprocket is removed, the chain
tensioner will trigger automatically. To then adjust the chain tensioner, the timing cover must be removed.
21. Remove the camshaft sprocket bolts.
22. Remove the sprockets from the camshafts.
23. Remove the camshaft bearing caps by loosening the bolts in stages - 1/2 to 1 turn. It is important that the removal ends at the bearing cap where the
tappets are loaded. Note the markings on the bearing caps when refitting to ensure that they are in the correct locations (A).
