9-3 (9440) V6-2.8L Turbo (2008)
11. Check that the marks on the chain match the markings on the sprockets.
12. Remove EN-48313 Fixing tool.
13. Tighten the bolts of both camshaft sprockets (B), counter holding with an open spanner on the camshaft flats.
Tightening torque: 65 Nm (48 lbf ft)
14. Fit the camshaft position sensor (555F) using a new gasket (C).
Tightening torque: 10 Nm (7 lbf ft)